Polyester resin eco type with hardener - 2kg - Soloplast

Soloplast polyester resin type eco 2 KG - with hardener designed for molding, consolidations and overlays. This resin is pre - accelerated, thixotropic (does not flow) and has an optical control (changes colour after addition of the catalyst MEC). Characteristics: Soloplast eco - friendly polyester resin For styrene - free coating, consolidation and molding Pre - accelerated, thixotropic (does not flow) and optical control (colour change after addition of MEC catalyst) Between several layers, wet - on - wet can be used Capacity: 2 kg Hardener MEC 100g included Pot life: about 20 minutes at 20 ° C with 3% MEC Consumption: 3 x the weight of the mat or 1 x the weight of the fabric Advantages: Use: a) reinforced with fiberglass: in coverings, moldings and repairs b) with fillers: for pouring and filling Gives a dry surface to the touch Easy cleaning with acetone Tips: The ECO resin is applied by hand with a sheepskin roller or a brush Remove the bubbles of air by means of a baking roller Between several layers, it is possible to work wet on wet The consumption of resin per m2 is equal to 3 times the weight of glass mat or 2 times For fabrics On a clean, dry, degreased and rough substrate, pass a first layer of catalysed resin, press the glass reinforcement and then soak it until translucent and so on as needed. On a wooden, metal or stone support, provide the primer G4 The preservation of the product in closed original box is at least 6 months at 20 ° C Keep the product out of the reach of children, do not breathe the Steam and avoid eye contact. Use Soloplast products with care. Before use, read the label and product information.