Polyester resin Soloplast kind eco 5 KG with hardener is ready for use after adding the catalyst MEC. Its color changes from blue to green, about 2 minutes after this addition. After 10 to 15 minutes, the coloring disappears and the resin becomes slightly amber. It is used with glass mat or glass fabric. Features: Polyester resin-type eco Soloplast For recovery, consolidation and molding with limited emanation of styrene catalyst Includes Pre accelerated, thixotropic (does not run) and optical control (changes color after adding the catalyst MEC). Capacity: 5 kg Pot life: 20 minutes at 20 C with 3% MEK Advantages: job: a) reinforced with fiberglass: recoveries, casts and were leaving b) with loads: for castings and Give fillings a dry to the touch easy to clean with acetone Tips: ECO resin is applied by hand with a lambswool roller or brush. Remove air bubbles with a bulleur roller. Between multiple layers, you can work wet on wet. The resin consumption per m2 is equal to 3 times the weight of glass mat or 2 for both tissues. On a clean, dry, degreased and rough, a first coat of catalyzed resin plate the reinforcing glass and soak it up? To translucency and so on as needed. Hard wood, metal or stone, provide the primer? Hooking G4. The conservation of the boxed product of close origin is at least 6 months at 20 C. Keep the product out of the reach of children, do not breathe vapor and avoid contact with eyes. Use Soloplast products safely. Before use, read the label and product information.