Polyurethane adhesive EMFI PU 40 FC - black 300ml x5

Polyurethane adhesive EMFI PU 40 FC - black 300ml x5, high modulus polyurethane putty for bonding different building materials and for making sealing and expansion joints EMFIMASTIC PU 40 FC is a one-component elastomeric sealant based on polyurethane with high elasticity, good tear and weather resistance. Has the SNJF label on anodized aluminium and mortar in category 25E Advantages : Set of 5 For all building joints Has the SNJF label on anodized aluminium and mortar in category 25E High elasticity Tear strength (DIN 53515) approx. 6.5 N/mm Good resistance to UV rays Excellent resistance to water and mist Can be painted: compatible with water-based paints (solvent-based: test required) Adheres without primer to the most common substrates: wood, aluminium, lacquered metal, polyester, glass, PVC, concrete, terracotta, stone, porcelain stoneware, earthenware Features : Polyurethane adhesive-mastic Colour: black Density DIN 52 451: 1.18 Skin formation: about 40mn Curing rate: 30mm/24h Operating temperature: +5C and +35C Temperature resistance: - 40C to + 80C Quantity: 5 x Polyurethane adhesive EMFI PU 40 FC - black 300ml Tips : SUPPORTS They must be flat, dry, free of dust, grease or other pollutants that could interfere with bonding. Sand metal surfaces if necessary. After sanding, clean them again. Allow surfaces to dry after degreasing. It is recommended to strip the concrete with a wire brush. INSTRUCTIONS FOR USE Apply with a manual or pneumatic spray gun. After application, smooth the joint with soapy water using a spatula. This product must be used within 24 hours of opening the cartridge or bag protection, otherwise the sealant may harden. If applied in cold weather, store at approximately 20C before use. During polymerization, avoid contact with uncured MS polymers, hybrid PU polymers or silicones as well as alcohols or ammonia. Clean tools with methyl ethyl ketone or acetone when the putty is not polymerized. After curing, abrasion is necessary. Use EMFI products with care. Before use, read the label and product information. Packaging : 5 x Polyurethane adhesive EMFI PU 40 FC - black 300ml Delivered in its original packaging