Polyurethane Sealant black 310ml building EMFI PU 25 x 5

The black polyurethane sealant EMFI PU 25 x 310ml building 5 is a single component elastomeric sealant polyurethane with high elasticity, good resistance to tearing and weathering. It receives SNJF label on anodized aluminum and mortar 25E category. It can also be painted after complete drying. Use: Collage of different materials for the building and the realization of sealing joints?. Adheres without primer on the most common materials: wood, aluminum, lacquered metal, polyester, glass, PVC, concrete, terracotta, stone, stoneware, earthenware. tile collage on wood and fibro. Features: 5-pack polyurethane adhesives EMFI PU 25 building Colour: black Density DIN 52451: 1.17 Skin formation 90 to 150 minutes Cure speed: 3mm / 24 Temperature of implementation: + 5 C and +35 C temperature resistance: - 40 C to + 80 C Advantages: for all joints Enjoys the label SNJF building on anodized aluminum and mortar category 25E Great elasticity resistance to tearing (DIN 53515) approximately 6.5 N / mm good UV resistance Excellent resistance to water and mist Can be painted: compatible with water-based paints (for solvent-based paints: necessary test) Do not stain marble or granite stone Tips: sUPPORTS the supports are well be flat, dry, dust, grease or other contaminants that could harm bonding. Sand the metal surfaces if necessary. After sanding, clean them again. Dry the surfaces after cleaning. It is recommended to clean concrete with a metal brush. DIRECTIONS FOR USE Apply with a caulking gun. After application, smooth the joint with? S soapy water using? Spatula. This product must be used within 24 hours after the? Opening of the protection of the cartridge or bag, otherwise, the sealant could harden. If? Application in cold weather, store at 20 C before use. During polymerization, avoid contact with MS polymers, silicones or hybrid PU uncured as well as? With alcohols or purchase ammonia. Clean tools with methyl ethyl ketone or purchase acetone before the sealant? S not cured. After polymerization, the? Abrasion is required. Use EMFI products safely. Before use, read the label and product information.