Primer 209D 250ml - Sikaflex

Description the sika? Primaire-209 D is a black primary of low viscosity, which dries by reaction with ambient air. Has been specially formulated for the treatment of painted surfaces and plastics avantapplication of Sikaflex polyurethanne glues ?. Sika? Primaire-209 D is manufactured according to ISO 9001 and 14001 quality insurance rules and the "Care" program. Primary-209 D is used to improve adhesion on the following supports: paintings: acrylics, alkyds/melamine, powder coatings, reticulating varnish by cooking.plastic: acrylic (PMMA), polycarbonate (PC), polystyrene (PS), GRP ( Peset EP), ABS, PVC, etc. COMPTED OF THE FAR VARIETY OF CHEMICAL COMPOSITIONS as well as surface states, it is recommended to always carry out preliminary tests. Demander advice to the manufacturer before using this primary on the supports Sensitive to stress cracking (acrylic, polycarbonates or abs, etc.) This product is exclusively reserved for professionals. Tests on real supports must be carried out to check the adhesion and compatibility of the product. Dry, and free from all contamination such as dust, oil, fat. Apply Sika Aktivator? Using the degreasing method + dry wip and allow to dry. Energetically shake Sika's Leflacon? Primaire-209 D until hear the balls turn freely in the bottom of the bottle. Continue to shake for about a minute. The Sika? Primaire-209 D can be applied with a brush, the felt or foam applicator stamp, or using any other application. Sika? Primaire-209D must be applied in a single chewing, fine and uniform.