PU 505 polyurethane adhesive Bostik 1kg is a versatile adhesive for structural bonding versatile. It is used for bonding, sealing, repairing, patching, manufacture of panels, laying of floor and wall coverings, tiles, flooring, indoor and outdoor sports flooring. But also on wood, metal, rigid or plasticized PVC, polystyrene, ABS, rubber, polyester them on themselves and on all common substrates. It is applied using a brush or a fine notched trowel Features: two - component adhesive 505 Colour: off - white Capacity: 1kg Proportion of the mixture by weight: Resin: PP 100, hardener: 25 PP initial viscosity: 30,000 mPa.s Pot life at 20 ° C: 1 hour open time thin layer: Taking about final 2 hours: about 24 hours minimum application temperature: + 5 ° C Advantages: high performance Can be used in thick Sustainability of results Tips: media substrates must be sound, dry, clean, dust, degreased and non - friable. User: The relatively low initial viscosity of the mixture increases during the reaction. It is the same for trapping power. In some cases, it is therefore advantageous to allow to react the mixture (10 mins) before application, for example in the case of clogging, seal, vertical sizing ... Glue one of the two faces to be assembled with the aid of a notched trowel (B3) according to the flatness of materials. Apply the material to stick on the adhesive coated substrate, carefully rub or for small areas maintain a slight pressure for a few seconds. In the case of nervous or distorted material, it is advisable to leave "erase" the glue for 30 minutes to obtain a tack greater. Use Bostik products safely. Before use, read the label and product information.
Products specifications
Adhesive colour | Off-white |
Size (L / ml / g / gal /oz) | 1Kg |