Putty (8 x 125 gr), repair of cracks, holes etc. - Wencon

Manufacturer: Wencon
Manufacturer part number: 1040
Vendor: ConceptSRP
€359.68
i h
Wencon Putty is a very quick curing, two component, epoxy compound supplied in a practical stick format, which is easy to use. This multipurpose epoxy paste is ideal for a wide range of emergency repairs where an ultra quick curing and moldable compound is required. Typical applications are patching sealing and filling of cracks, leakages and holes in pipes, on flanges, in tanks etc Cures in 10 - 20 minutes Simple apply procedure with cut and knead Patches and seals cracks, leakages and holes Strong adhesion to all metal surfaces Fully machinable
Products specifications
ColourNatural
Other InformationInstructions, for use. pair of nitrile gloves
Detailed SpecificationsMax temperature +60- +250°C (140 – 199°F) Consistency putty Mixing ratio vol. – Apply with hand/spatula Potlife at 20°C 3-6 min. mixed in small amounts Curing time 10-20 min. Machineability yes Specific volume 500 cm3 / kg
ApplicationApplication areas This multipurpose epoxy paste is ideal for wide range of emergency repairs where an ultra quick curing and mouldable compound is required. Typical applications are sealing, filling of cracks, leakages and holes in pipes, flanges, tanks etc. Applycation The Base and Activator is co-extruded into a 125g stick. Cut off the required amount of repair compound, knead it until an even colour is obtained and apply to the damaged area.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews