Rapid (8 x 125gr), fast - curing two - component, epoxy compound - Wencon

Manufacturer: Wencon
Be the first to review this product
Manufacturer part number: 1005
Vendor: ConceptSRP
€538.77
i h
Wencon Rapid is a fast - curing two - component, epoxy compound with a wide range of applications for emergency repairs and maintenance. Typical applications are emergency repairs, where a short curing time is required to reduce downtime. Wencon Rapid is very suitable for applications where thicker layers of material are required, as the compound quickly sets and becomes solid. The compound can also be used for regular maintenance jobs and as a filling compound. Fast curing – reduced downtime Wide range of applications Strong adhesion to all metal surfaces Simple mixing and application Convenient unit sizes
Products specifications
Detailed SpecificationsMax temperature +60 – +250°C (140-482°F) Consistency paste Mixing ratio vol. 1:1 Apply with spatula Potlife at 20°C 10-20 min. mixed in small amounts Curing time 40-90 min Machineability yes Specific volume 709 cm3 / kg Dielectric strength 10 KV/mm
ApplicationApplication areas Wencon Rapid is very suitable for applications where thicker layers of material are required, as the compound quickly sets and becomes solid. Typical applications are corroded tanks, pump housings and impellers, valves, tubes, pipes, heat exchangers, flange faces, seats, worn shafts, hydraulic rams and all emergency repairs, where a short curing time is required. The compound can also be used as a filling compound. Mixing Wencon products are designed to be simple to use and cost effective. Easy mixing ratio (1:1 by volume) reduces waste to a minimum and high specific volume gives high coverage rates.
Other InformationInstructions, for use. pair of nitrile gloves. mixing knife. mixing plate.
ColourLight Grey
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews