Reinforced putty type V11 - 660g - Yachtcare

Manufacturer: Soloplast
Manufacturer part number: 154634
€19.40
i h
Reinforced putty type V11 Soloplast 660g This is a resin filled with glass fibres, suitable for fills that require mechanical resistance. It is used to repair sheet metal, cast iron pipes, tanks and small holes smaller than 2 cm2 caused by rust. It can also be used on cracks and cracks in the wood. Characteristics: Reinforced polyester putty type V11 (sauerkraut type) Resin filled with glass fibers For collages, repairs or seals on almost all materials: wood, metal, composites, stone, cement ... Capacity: 660 g (hardener included) use: 5 minutes at 20 ° C, at higher temperature or with more hardener, this time decreases Life in pot at 20 ° C 4 to 5 minutes after addition of 2 to 3% of BPO paste hardener Conservation: 12 months at 20 ° C in closed original box Styrene free Advantages: Excellent adhesion Fast hardening whatever the thickness Very good resistance thanks to the incorporated glass fibres Easy cleaning with acetone Tips: The surfaces of contact must be clean, dry, rough and degreased Mix well to obtain a homogeneous paste The treated part can be sanded 20 minutes after application Attention flammable product, store out of the reach of children. Do not inhale vapours and only in well - ventilated area. In case of insufficient ventilation wear suitable respiratory equipment. Use Soloplast products with care. Before use, read the label and product information.
Products specifications
Volume (g)660
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews