release wax 135 � box 350 GR

mold release wax high performance polyester laminates manufactured in France. Containing silicone, the 34D gives the treated surfaces a deep gloss. It can be used up to a peak temperature of 135 C and allows for successive mold releases. Features: Wax used for synthetic resins release contains carnauba wax, synthetic waxes and high temperature resins physical state: solid wax mold Allows up to 135 C Colour: pale yellow Capacity: 350 gr Made France Advantages: fast drying easy application Can be used up to 135 C deep Brillant used by hand and gives a very beautiful state of castings area Tips: Spread thin and continuous layer, let dry until appearance of a whitish veil brillanter then using a soft cloth. On new molds, repeat this operation 3 times to 3 hours apart. For the first pieces made up, apply a thin layer after each molding. For thermoset compression, coating the mold with a thin layer and mold immediately. Reseal the box after use. Recommended storage conditions: Keep container tightly closed away from sources of ignition or heat at a temperature below 40 C. Warning: toxic to aquatic organisms and flammable. May cause long-term adverse effects in the aquatic environment. Although use appropriate container to avoid environmental contamination.