SADER Neoprene Contact Gel Adhesive - Immediate setting - 2.5L is an adhesive for bonding most materials on all substrates, indoors and out, under shelter: wood and laminate, rubber, leather and imitation leather, cork, rigid plastics on flat surfaces only, and metal. Not suitable for polyethylene(PE), polypropylene(PP) and expanded or extruded polystyrene. Application: Surfaces to be bonded must be clean, dry, free of dust and grease. Sand smooth surfaces. Apply a thin, even coat of adhesive to both surfaces using a brush. Allow solvents to evaporate Wait 10 minutes before assembling As soon as the glue no longer sticks to your fingers, assemble by pressing firmly. Advantages : Immediate, permanent set High peel strength Heat-resistant up to 110C Moisture-resistant Features : Temperature-dependent waiting time before assembly : 10 min. at +20c 20 min. at +15c Minimum operating temperature: +10c Maximum strength after 24 hours Cleaning fresh adhesive : acetone Consumption: 150 ml / m on each side, depending on substrate Shelf life: 18 months in original, unopened packaging, store in a cool, dry, frost-free place. Capacity: 2.5 L Ref. 30020077 Packaging: One SADER neoprene contact gel glue - Immediate setting - 2.5LDelivered in original packaging