SADER TurboResist 2-component, two-component repair adhesive - a patented formula that is versatile, fast, resistant and practical. One product to glue, repair, rebuild and re-seal! Advantages: Versatile, this product allows you to glue, rebuild, repair and seal all materials (except polyolefin and Teflon) A quick grip in 30 seconds Resistant to extreme tension, impact, can be pierced or painted Practice: allows to stick to 5m linear with 3 high-precision tips Features: Capacity: 10g Contains 3 high-precision self-mixing tips Maximum performance: after 24h Store in a cool, dry place Packaging: 1 x SADER TurboResist 2-component repair adhesive - 10g Tips: At first use, remove the black cap. Unscrew the gray cap and replace it with one of the applicator tips. Insert the pusher and press it to pull out the formula evenly. It is recommended to discard the first drops of glue Apply the product continuously at least every 5 minutes to continue using the same applicator tip, otherwise take a new tip Once the repair is complete, remove the tip and replace the cap gray on the syringe for later use with a new tip The bonding is instantaneous. Resistant to impacts, it can be painted, sanded and even drilled after only 10 minutes of drying. Use SADER products with care. Before use, read the label and product information.