Sanisil silicone anti - mold sealant - transparent - 300ml x 3 - Sika

Manufacturer: Sika
Be the first to review this product
Manufacturer part number: 441650X3
Vendor: Espace-Bricolage
€29.98
i h
Silicone anti - mold sealant SIKA Sanisil - Transparent - 300ml - pack of 3, resistant to mold and fungi, this sealant is ideal for jointing and caulking in sanitary environment. Very flexible its application is simple and its perfect rendering.
Products specifications
Silicone / sealant colourTransparent
Size (L / ml / g / gal /oz)300ml
ApplicationAfter the necessary preparation of the supports, install in the joint at the required depth, a Sika JOINTS FIT of section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge in a putty gun. Extrude the Sika Sanisil sealant into the seal and press it onto the seal lips making sure they are in good contact with them. Fill the joint continuously and avoid any air bubbles. Sika Sanisil should be tightly squeezed against the lips of the joint to allow good adhesion. It is recommended to use media protection strips if clean, straight edge joints are required. Remove the strips before the putty forms a skin. Do not use a smoothing agent containing solvents. Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website.
AdvantagesHigh elasticity and flexibility resistance to fungi and mold in the long term very good resistance to uv and weathering sanitary and other caulking application characteristics: density: 1.00 kg / l approx. polymerisation speed: 3.0 mm / 24 hours (23 ° c / 50% rh) skin formation time: 15 minutes approx. (23 ° c / 50% rh) application temperature: +5 ° c to +40 ° c capacity: 300ml colours: transparent reference: 441650 quantity: 3 packaging: 3x silicone anti-mold sealant sika sanisil - transparent - 300ml delivered in its original packaging advice: support the substrate must be clean, dry, sound, and homogeneous, free of oils, grease, dust and non-adhering or friable particles. paint, cement laitance and other loosely adhering elements should be removed. adheres without primer or activator. however, to obtain optimal adhesion and high-performance applications such as renovation work, joints that are highly stressed and joints that are highly exposed to the weather or immersed in water, primers and degreasers and surface preparations.
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews