Sanisil silicone anti - mold sealant - transparent - 300ml x 5 - Sika

Manufacturer: Sika
Be the first to review this product
Manufacturer part number: 441650X5
Vendor: Espace-Bricolage
€49.96
i h
Silicone anti - mould sealant SIKA Sanisil - Transparent - 300ml - Set of 5, for all your work in this sanitary environment, this putty will allow a perfect grouting and an optimal resistance to molds and fungi. A flexible and easy to implement formula for maximum productivity.
Products specifications
AdvantagesHigh elasticity and flexibility resistance to fungi and mold in the long term very good resistance to uv and weathering sanitary and other caulking application characteristics: density: 1.00 kg / l approx. polymerisation speed: 3.0 mm / 24 hours (23 ° c / 50% rh) skin formation time: 15 minutes approx. (23 ° c / 50% rh) application temperature: +5 ° c to +40 ° c capacity: 300ml colours: transparent reference: 441650 quantity: 5 packaging: 5x sika sanisil anti-mold silicone sealant - clear - 300ml delivered in its original packaging advice: support the substrate must be clean, dry, sound, and homogeneous, free of oils, grease, dust and non-adhering or friable particles. paint, cement laitance and other loosely adhering elements should be removed. adheres without primer or activator. however, to obtain optimal adhesion and high-performance applications such as renovation work, joints that are highly stressed and joints that are highly exposed to the weather or immersed in water, primers and degreasers and surface preparations.
ApplicationAfter the necessary preparation of the supports, install in the joint at the required depth, a Sika JOINTS FIT of section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge in a putty gun. Extrude the Sika Sanisil sealant into the seal and press it onto the seal lips making sure they are in good contact with them. Fill the joint continuously and avoid any air bubbles. Sika Sanisil should be tightly squeezed against the lips of the joint to allow good adhesion. It is recommended to use media protection strips if clean, straight edge joints are required. Remove the strips before the putty forms a skin. Do not use a smoothing agent containing solvents. Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website.
Size (L / ml / g / gal /oz)300ml
Silicone / sealant colourTransparent
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews