Sanisil silicone anti - mold sealant - white - 300ml - Sika

Manufacturer: Sika
Manufacturer part number: 441651
€9.99
i h
SIKA Sanisil anti - mold silicone sealant - White - 300ml, elastic, flexible and resistant to fungi and mold in the long term, this sealant is ideal for sanitary applications or any other caulking that requires such capacity.
Products specifications
Size (L / ml / g / gal /oz)300ml
AdvantagesHigh elasticity and flexibility resistance to fungi and mold in the long term very good resistance to uv and weathering sanitary and other caulking applications characteristics: density: 1.00 kg / l approx. polymerisation speed: 3.0 mm / 24 hours (23 ° c / 50% rh) skin formation time: 15 minutes approx. (23 ° c / 50% rh) application temperature: +5 ° c to +40 ° c capacity: 300ml colours: white reference: 441651 packaging: comes in its original packaging advice: support the support must be clean, dry, healthy, and homogeneous, free of oils, grease, dust and loose or friable particles. paint, cement laitance and other loosely adhering elements should be removed. adheres without primer or activator. however, to obtain optimal adhesion and high-performance applications such as renovation work, joints that are highly stressed and joints that are highly exposed to the weather or immersed in water, primers and degreasers and surface preparations.
ApplicationAfter the necessary preparation of the supports, install in the joint at the required depth, a Sika JOINTS FIT of section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge in a putty gun. Extrude the Sika Sanisil sealant into the seal and press it onto the seal lips making sure they are in good contact with them. Fill the joint continuously and avoid any air bubbles. Sika Sanisil should be tightly squeezed against the lips of the joint to allow good adhesion. It is recommended to use media protection strips if clean, straight edge joints are required. Remove the strips before the putty forms a skin. Do not use a smoothing agent containing solvents. Use Sika products with care. Before use, please consult the manufacturer product leaflet available on the sika.fr website.
Silicone / sealant colourWhite
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews