Interchangeable blades The bit holder can accommodate bits with 1/4' hexagonal shanks that comply with DIN ISO 1173-C 6.3 and E 6.3 standards. This system of interchangeable blades, stored in a compact pouch, makes transport and use much easier. A combination of excellence This impact screwdriver is the result of combining chisel screwdrivers and manual impact screwdrivers. It also combines the advantages of screwdrivers with interchangeable blades. Knock-in screwdriver ON / OFF function The impact screwdriver mode can be activated or deactivated by means of a lock selector on the tool. Thanks to this function, you won't be able to resist any hard-to-reach fittings. Tightening torque When activated, the hammer-action screwdriver function allows you to loosen hard-to-screw fittings with a simple tap on the head of the screwdriver using a hammer. The impact is transmitted without loss to the blade, giving you a torque of up to 25 Nm. Use of a 13 mm spanner possible This tool has a size 13 hexagonal recess for use with an additional spanner to give greater tightening and loosening force. Be sure to deactivate the impact screwdriver function when performing this operation. Robust bits The bits are designed to prevent premature breakage. They are extremely rigid to withstand the torque transmitted and have a long service life. https://youtu.be/OT3Un1LniWM Set contents (19 pieces) : Kraftform Plus 900 series impact screwdriver 1/4' x 163.5 mm Phillips® crosshead bits 70mm PH1 - PH2 - PH3 Pozidriv Phillips bits for 70mm impact screwdriver PZ1 - PZ2 - PZ3 Bits TORX 70mm TX15 - TX20 - TX25 - TX30 - TX40 Hex-Plus bits with hexagon socket 70mm 3 - 4 - 5 - 6 Slotted bits 70mm 0,8 x 4 - 1 x 5,5 - 1,2 x 6,5 Subscribe to our newsletter : Subscribe I accept the terms and conditions and the privacy policy