Sealant Bostik Simson MSR BC navy gray 290ml x5

Sealant Bostik Simson MSR BC navy gray 290ml x5 which is an elastic sealant single component based on MS Polymer. Product hardens quickly. This sealant is suitable for sealing a lower deck in tight against plated on a lower deck steel, aluminum, polyester or wood. Features: Raw material: MS polymer type: elastic polymration System: alkoxy (moisture-curing) Weight: 3 kg Skin forming (start): 30-40min / 20 C / 50% RH Dust: 5mm Extrusion: good dry matter content: 100% penetration (0.1 mm / 20 C): 180 Shore A: 32 Drive to 100% elongation: 0.6 MPa (DIN 52455, 5.2) Elasticity at break 300% (DIN 52455, 5.2 ) temperature resistance: long term -40 c to 100 c / short (30-60min): 180 C Capacity: 290ml cartridge color: gray Advantages: Does not contain any solvents or isocyanates permanent elasticity at temperatures between -40 to + 100 c implementation off at temperatures between 5 and 35 C Curing neutral, odorless and fast Compatible with most industrial paints based on alkyd resin and dispersion Very good resistance to UV light and aging; prolonged resistance to fresh water and salt water Simson MSR Bedding compound contributes to sound insulation and vibration damping. Storage stability 12 months in a dry, temperature between +5 and + 30 C in unopened original packing Tips: The GRIP Simson msr bedding compound to good unprimed adhesion on wooden racks and painted steel. If high traction performance requirements or in humid conditions, it is recommended to use the P Simson primer on wood surfaces and Simson M primer on metals. For good adhesion it is necessary that the supports are clean, dried and degreased. For optimal use of the high elasticity of Simson MSR BC a minimum 2mm layer of adhesive is preferred. IMPLEMENTATION The Simson MSR BC is easily applied using a hand gun or compressed air. Optionally you can rub the sealant after curing. Use Bostik products safely. Before use, read the label and product information.