Sealing coating SIKA Sikalastic 850W - 10kg

SIKA Sikalastic 850W - 10kg waterproofing liner, an underlay tiling coating for intermediate floors, walls and indoor pool areas that forms an adherent, waterproof and crack-resistant membrane. The product is applied in 2 layers and is quickly recoverable by tiling or screed with coating. Advantages: Ready-to-use product, in aqueous phase High elasticity which makes it possible to bridge cracks Watertight with water Quickly recoverable by hard protection: tiled or sealed tile, screed with coating (plastic floor, resin coating, ... ) Good adhesion on concrete, mortar, plaster, plasterboard waterproofed or not, plasterboard hardboard and waterproof, terracotta tiles, aerated concrete, wood and wood-based panels (CTBH, CTBX) Read carefully the instructions before use the product Characteristics: Density: About 1,2 pH value: About 9 Skin formation time: 5 C = 7h / 20 C = 4h / 35 C = 2h Consumption: 2.2 kg / m to apply in two layers in all areas (floor and wall) to be sealed Application Temperature: + 5 C and + 35 C Capacity: 10 kg Color: Straw yellow Reference: 169083 Packaging: Comes in original packaging Advice: SUPPORT After being prepared of suitable surface, the support must be especially clean, healthy, free of any part not or only slightly adherent, and free of products that may affect the adhesion of SikaLastic-850 W APPLICATION SikaLastic 850 W must be applied in two layers, using a medium-bristle roller, or a rectangular or Flemish smoother. Apply the first layer and, at the singular points, rub the Sikarmature weft in the first fresh layer. The second layer should be applied to the first hardened layer (12 to 48 hours of waiting depending on temperature and humidity). Close the bucket carefully after use. SikaLastic 850 W must be hard-coated. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.