Seatalk 1 to seatalk ng converter kit - Raymarine

SeaTalk 1 to SeaTalk NG Converter Kit Raymarine's converter kit transforms a SeaTalk1 signal into a SeaTalkNG signal. The Seatalk1 was the 1st generation networking solution for Raymarine products. With this conversion kit, you will be able to communicate your old raymarine Seatalk 1 devices with the new Sea Talk NG devices. Specific Raymarine products (eg ST70 instruments) have a bridging function allowing connection of SeaTalk NG to SeaTalk1 products using appropriate adapter cables. The converter kit is thus the best solution to save money while retaining the possibility of upgrading your Seatalk installation. Let's talk about the new Seatalk: the SeaTalk NG. It is an interconnection system between Raymarine products which includes a central bus allowing the interconnection of Raymarine products using branched cables. The SeaTalk NG protocol transfers digital data between products connected to the central SeaTalkNG bus SeaTalk Ng is a robust cabling and connection system compatible with NMEA 2000. Specifically designed for the marine environment, comprising a single powered backbone with two terminations, one at each end. What's in the kit? The conversion kit includes all the components needed to interface to SeaTalk 1 devices and establish basic SeaTalk NG connectivity on the vessel. - Easy plug - and - play connectivity with SeaTalkng networks. - Works with some SeaTalk1 products; instruments, pilot heads, GPS and LifeTag sensors. - Included SeaTalk NG components establish the basic connectivity of the backbone network. - Easily expandable using Raymarine SeaTalkng network components. - 1x ST1 to STNG converter - 2x SeatalkNG terminations - 2x white connector caps - 1x 1m STNG - ST1 cable - 1x SeatalkNG power cable