Self-levelling flooring for SIKA Level Indoor flooring - Grey - 25kg

Self-leveling levelling compound for interior floors SIKA Level Interior - Grey - 25kg, is a self-leveling levelling compound classified P3, ideal for levelling out unevenness and irregularities in supports. It can be applied from 1 to 10mm thick. Suitable for use on water heated floors, it is combined with Sika Level Primer on all substrates and must be covered with carpeting, textile and plastic flooring, glued ceramic flooring, glued or floating parquet, rigid plastic tiles. Advantages : Ready to spoil Quick return to service Excellent manoeuvrability Application from 1 to 10 mm thick Pompable Features : Density of fresh mortar: 1.3 Grain size: from 0 to 0.5 mm Temperature: + 5C and + 30C Thickness: Room P2: from 1 to 10 mm / Room P3: from 3 to 10 mm Practical operating time: Approx. 20-30 min. at +20C. The DPU decreases as the temperature rises Waiting time at +20C: Before pedestrian traffic: approx. 4 hours / Before sanding (if necessary): 4 to 6 hours Covering time at 20C: Tile or carpet: 24 hours / Rigid plastic tile or paint: 24 to 48 hours / Glued parquet: 72 hours Consumption: 1.5 kg/m/mm thickness Colour: Concrete grey Packaging : 25kg Reference : 462267 Packaging : 1x Self-levelling rake for SIKA Level Indoor Floors - Grey - 25kg Delivered in its original packaging Tips : The substrate must be clean, sound, stable, cohesive, dust-free and free of loose or non-adherent parts or parts that could interfere with adhesion. After applying Sika Level Primer, prepare Sika Level Interior as follows: Mixing rate: 5.25 l of clean water per 25 kg bag. Mix with an electric mixer (500 rpm) for 1 to 2 minutes until a smooth, lump-free, homogeneous mixture of uniform colour is obtained. Mixture resting time: 2 min. Interior Sika Level can also be prepared with a continuous mixing machine. Do not add water during application. Sika Level Interior is applied over a touch dry primer (waiting time at +20C: approx. 30-45 min.). Pour the mixed Sika Level Interior onto the substrate. Using a stainless steel smoothing machine, spread the Sika Level Interior on the floor by "pulling it to zero" to ensure adhesion to the substrate, then smooth and adjust the desired thickness by back and forth. The permissible application thickness depends on the UPEC classification of the room: Room P2: 1 to 10 mm and Room P3: 3 to 10 mm. Use Sika products with care. Before use, please refer to the manufacturer's product manual available on the sika.co.uk website.