Self - priming liquid ring pump CP - 20G - 230/400V 0.37KW 0.5HP - 01ACP203G - Gianneschi

Manufacturer: Gianneschi
Manufacturer part number: 01ACP203G
Vendor: Lyvio Marine
€805.35
i h
The Gianneschi CP - 20G - 230/400V is a Bronze CP Series Self Priming Liquid Ring Pump and Motor unit with Bronze Impeller, 3/4 Inch by 3/4 Inch Ports, coupled to a 0.37KW (0.5 Horsepower), 2800 RPM, 230/400 volts AC, 50 Hz Motor. This pump operates at 230/400 V, 50Hz at 0.5 Hp, an it can go as high as 2800 RPM, and is self - priming up to 8 m. It utilizes Class F insulation, IP 55 protections, and is specially equipped with a high quality ceramic mechanical seal with graphite inox, a bronze body and impeller, and a 316 stainless steel shaft. It is recommended that one install a clapet valve and filter with its suction pipe in order to prevent any backflow through the pump, and the installer must pump water through it when rebboting or first initializing it in oreder to achieve the necessary suction for it to automatically prime itself. Motor has F class Insulation, IP 55 Protection.
Products specifications
Detailed SpecificationsPump Body: Bronze Impeller:Bronze Shaft:316 Stainless Steel Port Size:Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch. Motor Specs :0.37KW (0.5 Horsepower), 2800 RPM, 230/400 volts AC, 50 Hz. 16LBS
Length (mm)300
Width (mm)300
Height (mm)250
Voltage(V)230V/400V
Power rating (Kw/Watts)0.37Kw
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews