Self - priming liquid ring pump CP - 40G - 230/400V 0.75 KW 1HP - 01ACP4003G - Gianneschi

Manufacturer: Gianneschi
Manufacturer part number: 01ACP4003G
Vendor: Lyvio Marine
€2190.83
i h
The Gianneschi CP - 40G - 230/400V is a Bronze CP Series Self Priming Liquid Ring Pump and Motor unit with Bronze Impeller, 1 - 1/2 Inch by 1 - 1/2 Inch Ports, coupled to a 0.75 KW (1 Horsepower), 1450 RPM, 230/400 volts AC, 50/60 Hz, Three Phase Motor. This pump is specially equipped with a bronze impeller and body, a 316 stainless steel shaft, an a high quality ceramic mechanical seal with graphite inox, as well as utilizes IP55 protections and Class F insulation. It is self - priming up to 8 m, it can go as high as 1750 RPM, and it operates at 60 Hz at 2 Hp. It is recommended that one install a clapet valve and filter with its suction pipe in order to avoid backflow through the pump, and the installed must pump water through it when either rebooting or first initializing it in order to achieve the necessary suction for it to automattically prime itself. Motor has F class Insulation, IP 55 Protection. WEIGHT : The Gianneschi CP - 40G - 230/400V weighs 59 Lbs.
Products specifications
Length (mm)430
Detailed SpecificationsPump Body:Bronze Impeller:Bronze Shaft:316 Stainless Steel Port Size:Inlet Port is 1-1/2 Inch, Discharge Port is 1-1/2 Inch. Motor Specs :0.75 KW (1 Horsepower), 1450 RPM, 230/400 volts AC, 50/60 Hz, Three Phase.
Power rating (Kw/Watts)0.75Kw
Voltage(V)230V/400V
Height (mm)193
Width (mm)185
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews