Separ Filter Oil Water Separator Single 300 Lt/H Swk2000/5 With Plastic Bowl, Metal Baffle And Water Alarm Sensor Contacts

The SEPAR 2000/5 filter separator, very light and easy to install, ensures high performance with low pressure drops, protecting all engine components (injection pump, injectors, valves and pistons) while obviously lowering maintenance costs. Technical characteristics: Flow rate 5 Litres/Minute (300 LT/H) Transparent bell housing with metal baffle and contacts for water alarm sensor Connection thread Inlet Outlet M16 x 1.5 R.I.NA. approved. SEPAR 2000 is a water separator and diesel fuel filter. An innovative multiple centrifugal system provides the solution to water and impurity problems in diesel fuel. Advantages of SEPAR 2000: Small size in relation to flow rate High performance Low pressure drop Long-life filter element (cartridge) Easy installation Simple maintenance In 1992, the company Willibrord Löesing designed a new generation of SEPAR fuel filters, called SEPAR 2000, characterised by an effective system for separating water and impurities from fuel. Water and impurities can cause high wear on the fuel pump and injectors, resulting in reduced reliability and the need for costly engine repairs. The separation and filtration process takes place according to a new, unique and patented concept, applied across the entire range. The SEPAR 2000 system is distinguished by its small size in relation to the actual flow rate. The SEPAR 2000 is installed on the suction side of the fuel supply system, between the tank and the fuel pump mounted on the engine. The fuel enters the filter through inlet port A or B (see figure), depending on installation requirements, taking care to close the unused port with a threaded plug. RACOR 500MA racor cartridges 900 MA 1000 MA racor