Set of 3 SIKA SikaSeal 109 Carpentry Silicone Putty - Anthracite - 300ml

This silicone sealant SIKA Sikaseal 109 Joinery will be essential in your joinery work. Usable inside and outside, this silicone sealant is easy to apply and to smooth. Unaffected by the weather after polymerization, it will resist the hazards of aging. It is suitable for making joints in new and renovation work, such as joints in heavy and light prefabrication, in glass and mirror work, around exterior and interior joinery (wood, aluminum, PVC), curtain walls, etc. This product is classified A+ "very low emissions" on the index of emission of volatile substances in the air presenting a risk of toxicity by inhalation, on a scale of class going from A+ (very low emissions) to C (strong emissions). Sika is a leading chemical company in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: An adhesion that does not require priming on most substrates Odorless Easy application and smoothing Does not drip Remains flexible even at low temperatures Insensitive to weathering after curing Characteristics: Density: ? 1.01 Application temperature: +5C to +40C Curing speed: ? 2 mm in 24 hours at +23 C and 50% RH Skin formation time: ? 35 minutes at +23C and 50% RH Color: Anthracite Packaging : 12 x 300ml Reference : 525042x3 Packaging: Pack of 3 SIKA SikaSeal 109 Carpentry Silicone Putty - Anthracite - 300mlDelivered in its original packagingUse Sika products with care. Before use, please consult the manufacturer's product leaflet, which is available on the sika.co.uk website Advice : SUBSTRATESubstrates must be cohesive, sound, clean and dry.In all cases of use, substrates and joint lips must be free of all non-adherent or poorly adhering parts and of any product that may interfere with the adhesion of the sealant (grease, oil, dust).APPLICATIONComply with DTU 44.1. In particular, do not make joints less than 5 mm wide.Use a Sika FILLING FILLER applied with non-cutting tools to avoid damaging the surface.Apply the filler in a continuous joint with a manual, pneumatic or electric gun, avoiding any air inclusions.Carefully squeeze the filler against the lips of the joint.Then smooth with a brush moistened with slightly soapy water, if necessary, before a skin forms.