Set of 3 SIKA SikaSeal 109 Carpentry Silicone Sealants - Black - 300ml

This SikaSeal 109 Carpentry Silicone Sealant will be indispensable in your carpentry work. For interior and exterior use, this silicone sealant is easy to apply and smooth. It is weather resistant after curing and will resist the hazards of aging. It is suitable for making joints in new and renovation work, such as joints in heavy and light prefabrication, in glass and mirror work, around exterior and interior joinery (wood, aluminum, PVC), curtain walls, etc. This product is classified A+ "very low emissions" on the index of emission of volatile substances in the air presenting a risk of toxicity by inhalation, on a scale of class going from A+ (very low emissions) to C (strong emissions). Sika is a leading chemical company in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: Adhesion that does not require priming on most substrates Odorless Easy application and smoothing Does not drip Remains flexible even at low temperatures Insensitive to weathering after curing Characteristics: Density: ? 1.01 Application temperature: +5C to +40C Curing speed: ? 2 mm in 24 hours at +23 C and 50% RH Skin formation time: ? 35 min at +23C and 50% RH Color : Black Packaging : 300ml Ref. 525041x3 Packaging: A batch of 3 SIKA SikaSeal 109 Carpentry silicone sealants - Black - 300mlDelivered in its original packagingUse Sika products with care. Before use, please consult the manufacturer's product information, available on the sika.com website Advice : SUBSTRATESubstrates must be cohesive, sound, clean and dry.In all cases of use, substrates and joint lips must be free of all non-adherent or poorly adhering parts and of any product that may interfere with the adhesion of the sealant (grease, oil, dust).APPLICATIONComply with DTU 44.1. In particular, do not make joints less than 5 mm wide.Use a Sika FILLING FILLER applied with non-cutting tools to avoid damaging the surface.Apply the filler in a continuous joint with a manual, pneumatic or electric gun, avoiding any air inclusions.Carefully squeeze the filler against the lips of the joint.Then smooth with a brush moistened with slightly soapy water, if necessary, before a skin is formed.