Sika 292I White 600ml Bag.

Surface Preparation: Prior To The Application Of Sikaflex®-292I, Surfaces Must Be Clean, Dry, And Free From Any Traces Of Grease, Oil, And Dust. It Is Essential To Carry Out Appropriate Surface Treatment To Ensure A Lasting Bond. It Is Recommended To Consult The Current Edition Of The Appropriate Sika® Pre-Treatment Table For Surface Preparation Suggestions. Please Note That These Suggestions Are Based On Experience And Should Always Be erified Through Tests On Original Substrates. Application: Sikaflex®-292I Can Be Extruded Between 10 °C And 40 °C (Climate And Product), But It Should Be Considered That Changes In Reactiity And Application Properties Can Affect The Final Result. The Optimal Temperature For Substrate And Sealant Is Between 15 °C And 25 °C. Please Note That The iscosity Of The Adhesive Will Increase At Low Temperatures. For Easy Application, It Is Recommended To Condition The Adhesive To Room Temperature Before Use. To Ensure A Uniform Thickness Of The Joint Line, It Is Recommended To Apply The Adhesive In The Form Of A Triangular Bead. Sikaflex®-292I Can Be Extruded With Manual, Pneumatic, Or Electric Guns. The Open Time Is Significantly Shorter In Hot And Humid Climates. The Parts Must Always Be Installed Within The Open Time. Neer Join Adhesive Parts If The Adhesive Has Formed A Skin. Tooling And Finishing: Tooling And Finishing Should Be Carried Out Within The Skin Time Of The Sealant. Sika® Tooling Agent N Is Recommended For Use. Other Finishing Agents Should Be Tested For Suitability And Compatibility Before Use. Remoal: Uncured Sikaflex®-292I Can Be Remoed From Tools And Equipment With Sika® Remoer-208 Or Another Suitable Solent. Once Cured, The Material Can Only Be Mechanically Remoed. Hands And Exposed Skin Should Be I mmediately Washed With Sika® Cleaner-350H Cleaning Towels Or A Suitable Industrial Hand Cleaner And Water. Do Not Use Solents On The Skin!