Sika Activator 205 - 250 ml

Manufacturer: Sika Marine
SKU: SIK.3210
Manufacturer part number: SIK.3210
€26.23
i h
Application Method For The Nautical Sector: To Achiee Good Adhesion, Surfaces Must Be Clean, Dry, And Free Of Grease, Oil, Dust, And Other Contaminants. In Some Cases, Adhesion Can Be Improed By Adding And/Or Combining Pre-Treatment Processes Such As Abrasion And Cleaning Before Applying The Actiator. Pass The Area To Be Bonded With A Clean, Damp (Not Wet) Paper Towel Soaked In Sika® Aktiator-205. Neer Soak The Towel In The Actiator And Only Wipe The Surface With A Clean Side. Do Not Dampen The Same Paper Towel Twice And Change It Frequently. Sika® Aktiator-205 Should Be Applied Sparingly As Excess Actiator Can Cause Adhesion Failure. If The Pre-Treated Area Is Not Bonded Within The Maximum Flash-Off Time, The Actiation Process Must Be Repeated (Only Once). The Ideal Temperature For Application And Surface Preparation Is Between 15°C And 25°C. The Consumption And Application Method Depend On The Specific Nature Of The Substrates. After Use, Tightly Close The Container Of Sika® Aktiator-205 To Preent Solent Loss.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews