SIKA Anchorfix-1 Evolution chemical quick sealing resin - Stone tone - 300ml

SIKA Anchorfix-1 Evolution - Stone Tone - 300ml, stryne-free, polyester resin-based rapid chemical sealant, packaged in a single-body cartridge. Advantages : Can only be used by experienced professionals. Quick sealing of threaded rods in masonry Versatile, easy to extrude, fast curing, high performance product Multi-use in all supports: brick, cinder block, aerated concrete For use with a universal extrusion gun Can be used at low and high temperatures (Operating range: -5C to +40C) European Technical Assessment No sagging, even on the underside Rating A+: Very low level of VOC emissions to indoor air CE marking according to ETAG 029, European Technical Assessment ETA 18-0968 (masonry support with M8-M16 threaded rods). Sealing of threaded rods in concrete, stone, etc. not covered by ETA; prior testing required on site Features : Density: ~1.74 for mixing. Compressive strength : ~75 MPa ( 7 days at +20C ) Flexural strength : ~ 30 MPa ( 7 days at +20C) Modulus of elasticity in flexion: ~4000 MPa Layer thickness: 3 mm max. Product temperature: between +5C and 35C Ambient air temperature: between -5C and +40C Colour : Your stone Cartridge 300 ml Packaging : x1 SIKA Anchorfix-1 Evolution Chemical Fast Sealing Resin - Stone tone - 300ml Delivered in its original packaging Tips : SUPPORT The substrate must be clean, sound and cohesive. The strength of the substrate must be checked and evaluated. In case of doubt or for hollow supports of unknown strength, on-site tests are recommended (tensile test by pulling out threaded rods). Clean the anchor hole: it must be clean, dry, free of grease and oil. It must be cleaned by brushing to remove residual dust. The threaded rods to be sealed must be clean, degreased and free of any substance or particles (dust, grease, oil, etc ...). Use Sika products with care. Before use, please consult the manufacturer's product manual available on the sika.com website.