SIKA Anchorfix 1 Evolution rapid chemical sealing kit, a complete kit for high performance chemical seals on many substrates (bricks, blocks, cellular concrete). The hardening of the polyester resin is provided with a tracer with a color change. Advantages: Resin Color Curing Plotter Versatile, easy to extrude, high performance Multi-Brick (brick, breeze block, aerated concrete) European Technical Assessment Fast curing Styrene free Usable with universal extrusion gun Kit includes 1 cartridge of 300 ml, 2 static mixers, 6 sieves - Diameter: 15 x 130 mm, 6 M10 class 8.8 threaded rods of 170 mm very high strength galvanized steel anticorrosion treated + washers and nuts Characteristics: Density: 1,63 Temperature d application: medium: - 5 C to + 30 C / product: + 5 C to + 30 C Colors: Your stone (extrusion: green) Kit including 1 cartridge of 300 ml, 2 static mixers, 6 sieves - Diameter: 15 x 130 mm, 6 threaded rods M10 class 8.8 170 mm high strength galvanized steel anticorrosion treated + washers and nuts Reference: 529724 Packaging: Comes in original packaging Advice: SUPPORT The support must be clean, healthy and cohesive. APPLICATION Introduce the nozzle at the bottom of the hole and then by successive pressures on the gun trigger, extrude and inject the resin from the bottom of the hole or sieve while progressively pulling back the mixing nozzle. To do this, move the gun a graduation on the nozzle between each pressure on the trigger. Be careful to avoid air inclusions in the resin; until the end of the implementation, the extrusion must be continuous and not subject to stops, or withdrawal of the nozzle from the hole. Close the sieve with the center ring (in case of hollow body sealing). The conical part of the ring must imperatively be returned to the body of the sieve. Immediately engage the sealing element with a slight rotational movement clockwise to the bottom of the hole. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.