SIKA deactivated concrete kit 25m� - Surface protector 20kg - Deactivator 5L - Colorless protection for floors 11L

SIKA deactivated concrete kit 25m - Surface protector 20kg - Deactivator 5L - Colorless protection for floors 11L, the surface protector can be used regardless of the application plane (horizontal/vertical) and on all construction materials: concrete, stone, paving stones, wood, paint, coating, aluminum, glass, plastic. It does not modify the aspect of the treated materials and ensures a temporary protection against the projections of concrete and deactivant on the surfaces near the working area. The deactivator is a concrete stripper, leaving an aesthetic appearance of "washed gravel" with a deactivation depth of approximately 4 to 6 mm. Use on concrete with aggregates between 12 and 20 mm. Deactivating concrete reduces the risk of slipping. Finish the work with the protection included in the pack, which allows an aesthetic and uniform finish with a wet or satin appearance depending on the application. Resistant, the product does not yellow in time and does not deteriorate. Specialized in chemical products, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: The protector can be used on all building materials: stone, paving stones, wood, paint, plaster, aluminum, glass, plastics, concrete Aesthetic aspect of the "washed gravel" type For concrete with aggregates between 12 and 20 mm Revives colors Improves resistance to stains (oil, grease...) Characteristics : Surface protector Consumption: ? 200 to 300 g/m depending on the nature of the support to be treated Product color: Opalescent green 20 kg bucket Surface deactivator Deactivation depth: ? 4 to 6 mm Consumption: 4 to 5 m per liter 5 L canister Surface protector Drying time: (drying must be protected from rain) Dust-free: 30 minutes at 20C / Fully dry: 24 hours at 20C Consumption: (depending on the porosity of the supports): Mortar-based substrates: 2 coats of approximately 100 to 150 g/m2 per coat Very closed substrates: a single coat of 100 to 150 g/m2 is sufficient. 11L pail Packaging: 1x SikaCem Film Surface Protector 20kg1x SikaCem Surface Deactivator 5L1x Colourless Floor Protection 11LDelivered in original packagingRead instructions carefully before use.