SIKA FastFix 138 FTP - Dark grey - 25kg

SIKA FastFix 138 FTP - Dark Grey - 25kg, is a fast hardening micro-concrete used for sealing and wedging road accessories, making pavement joints and repairing potholes. This product is Orange registered. Advantages : Coated color finish Manoeuvrability adjustable according to water dosage to obtain a firm or plastic consistency Quick return to service (low setting and hardening times) Protection of metal parts against corrosion thanks to its basic pH value Features : Density of fresh mortar: approx. 2.28 Grain size: 0/8 mm Application temperature: from +5C to +35C Practical duration of use: at 5C = 30min / at 20C = 15min / at 30C = less than 10min Waiting time: 3h between 5C and 15C / 2h between 15C and 30C / 1h above 30C Consumption: Approx. 2.3 kg of Sika FastFix-138 FTP per litre of sealant, i.e. 1 bag of 25 kg for approx. 12 litres of mortar. Colour: Dark grey Packaging : 25kg Reference : 439213 Packaging : 1x SIKA FastFix 138 FTP - Dark grey - 25kg Delivered in its original packaging Tips : SUPPORT: The support must be sound, cohesive, clean, non-greasy, dust-free and free of any loose or poorly adherent parts that may affect the adhesion and monolithic nature of the assembly. The support must be abundantly moistened the day before installation. Again before applying Sika FastFix-138 FTP, the substrate must be moistened, but without dripping or puddles on the surface. APPLICATION : For the sealing of road markings: Apply Sika FastFix-138 FTP, of a firm consistency, as a bed for adjusting and wedging the part to be sealed. Position the part to be sealed. Pour the mixed Sika FastFix-138 FTP in a plastic consistency, down to the bare pavement surface, in order to seal the part properly. It may be necessary to vibrate the mixed Sika FastFix-138 FTP to a firm consistency in order to facilitate placement and to ensure proper clamping of the product. Finish with a trowel finish, bare of the pavement or 3 cm below, in the event of a subsequent overlay with asphalt. Fresh mortar must be protected from rain during setting. It does not require any special treatment. However, in case of high temperatures and/or wind, apply a curing product such as ANTISOL O. Use Sika products with care. Before use, please refer to the manufacturer's product manual available on the sika.co.uk website.