SIKA Floor Cleaning and Protection Pack - Sikagard-127 Stop Tout en 1 5L - Sikagard-212 Floor Protector Satine 5L

SIKA Floor Cleaning and Protection Pack - Sikagard-127 Stop All in 1 5L - Sikagard-212 Satin Floor Protector 5L, ideal for giving a new look, treatment and long lasting protection to your floors. SIKA's Sikagard-127 Stop All in 1 is a highly effective treatment for green, black and red marks. Its professional formula is reinforced in active principle for a unique treatment of roofs, facades and floors. Colorless, odorless and ready to use, it does not require rinsing and can be applied both horizontally and vertically, on all surfaces without leaving any traces. SIKA Water Repellent - Sikagard-212 Satin Floor Protector is a ready-to-use, UV-resistant, water-based resin. This product effectively waterproofs porous substrates and protects them against the penetration of water, oil and most stains (grease, dirt, etc). It also acts as an effective binder when used on sand joints. It penetrates deep into the joint, helps hold pavers in place and protects them from seepage. It is suitable for concrete, stone, cobblestone surfaces, etc. Ideal for pedestrian areas, areas exposed to vehicle traffic, parking lots, terraces, balconies, sidewalks, etc. Specialized in chemicals, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: Sikagard-127 Stop All in 1: Can be applied horizontally or vertically Can be applied to all substrates: slate, shingle, stone, brick, concrete, mortar, fiber cement, plaster, earthenware, polyester, zinc... Acts quickly and leaves no trace on the materials whose conservation it improves Long-lasting preventive effect Can be painted or coated, once the traces are eliminated Sikagard-212 Satin Floor Protector : Water-based product UV and weather resistant Protects against water, oil and diesel fuel Reduces staining and hydrocarbon contamination Resistant to de-icing salts Improves resistance to freeze-thaw cycles Revives the substrate by giving it a satin appearance Facilitates cleaning and maintenance of the substrate Reduces efflorescence Easy to apply For exterior use Characteristics : Sikagard-127 Stop All in 1 : Density: approximately 1 pH value: approx. 8 Consumption: 1 L per 7 to 10 m approx. Color: colorless Capacity: 5 L Ref. 698339 Sikagard-212 Satin Floor Protector Water Repellent : Density: approximately 1 pH value: approx. 9 Consumption: Surfaces without joints: 0.2 to 0.3 L/m for the 1st coat - 0.10 to 0.15 L/m for the 2nd coat / Paving stones with sand joints: 0.5 to 1.5 L/m for the 1st coat - 0.1 to 0.2 L/m for the 2nd coat Application temperature: +5C min / +30C max Color : White, colorless and satin after drying Capacity : 5 L Ref. 704549 Packaging : Pack Cleaning and Protection Floor SIKA - Sikagard-127 Stop 5L - Sikagard Protection Sol SATINE 5L1 x Curative and descaling treatment SIKA - Sikagard-127 Stop All in 1 - 5L1 x Water repellent SIKA - Sikagard-212 Protecteur Sol Satine - 5L Delivered in their original packagingCarefully read the instructions before using the product