SIKA Floor Protection and Cleaning Pack - Sikagard-127 Stop 20L - Sikagard Floor Protection Waterproofing SATINE 20L

SIKA Floor Cleaning and Protection Pack - Sikagard-127 Stop 20L - Waterproofing Sikagard Protection Sol SATINE 20L, ideal for giving a new look, treatment and long lasting protection to your floors. Sikagard-127 Stop All-in-One is a highly effective treatment for green, black and red streaks. Its professional formula is reinforced with active ingredients for a unique treatment of roofs, facades and floors. Colorless, odorless and ready to use, it does not require rinsing and can be applied horizontally as well as vertically, on all surfaces and without leaving traces. Sikagard Floor Protection SATIN is a ready-to-use, water-based, UV-resistant resin. This product effectively waterproofs porous substrates and protects them from the penetration of water, oil and most stains (grease, dirt, etc.). It also acts as an effective binder when used on sand joints. It penetrates deep into the joint, helps hold pavers in place and protects them from seepage. It is suitable for concrete, stone, cobblestone surfaces, etc. Ideal for pedestrian areas, areas exposed to vehicle traffic, parking lots, terraces, balconies, sidewalks, etc. Specialized in chemicals, Sika is a leader in the development and manufacture of systems and products for bonding, sealing, soundproofing, reinforcement and protection in the construction and automotive industries. Product innovation and excellence in quality and service have been the company's priorities for over 100 years now! Benefits: Sikagard-127 Stop All in 1 Can be applied horizontally or vertically Can be applied to all substrates: slate, shingle, stone, brick, concrete, mortar, fiber cement, plaster, earthenware, polyester, zinc... Acts quickly and leaves no trace on the materials whose conservation it improves Long-lasting preventive effect Can be painted or coated, once the traces are eliminated Waterproofing agent SIKA Sikagard Protection Sol SATINE Water-based product UV and weather resistant Protects against water, oil and diesel fuel Reduces staining and hydrocarbon contamination Resistant to de-icing salts Improves resistance to freeze-thaw cycles Revives the substrate by giving it a satin appearance Facilitates cleaning and maintenance of the substrate Reduces efflorescence Easy to apply For exterior use Characteristics : Sikagard-127 Stop All in 1 Density: approximately 1 pH value: approx. 8 Consumption: 1 L for approx. 7 to 10 m Color: colorless Capacity: 20 L Ref. 698420 Waterproofing agent SIKA Sikagard Protection Sol SATINE Density: about 1 pH value: approx. 9 Consumption: Surfaces without joints: 0.2 to 0.3 L/m for the 1st coat - 0.10 to 0.15 L/m for the 2nd coat / Paving stones with sand joints: 0.5 to 1.5 L/m for the 1st coat - 0.1 to 0.2 L/m for the 2nd coat Application temperature: +5C min / +30C max Color : White, colorless and satin after drying Capacity : 20 L Ref. 460504 Packaging : SIKA Cleaning and Floor Protection Pack - Sikagard-127 Stop 20L - Waterproofing Sikagard Floor Protection SATIN 20L1 x SIKA Sikagard-127 Stop All in 1 - 20L1 x SIKA Sikagard Floor Protection SATIN - 20L Delivered in their original packagingCarefully read the instructions before using the product