Kit SIKA deactivated concrete 100m Deactivating 20L - Colourless protection for 22L and 11L floors, This pack reduces the risk of slipping on exterior concrete floors, it also protects aesthetic concrete floors, slabs and paving stones. Advantages : SikaCem Deactivator 4-6 20L Aesthetic appearance of the "washed chippings" type with a deactivation depth of approx. 4 to 6 mm. Anti-slip: reduces the risk of slipping for pedestrians Ready to use Read the instructions before use Sikagard 681 Clear Floor Protection 22L Provides a wet or satin finish depending on the nature of the substrate and the quantity applied. Aesthetic and uniform finish Protects substrates from aggressive atmospheric agents and carbon dioxide Brings out the colours Improved stain resistance Easy cleaning and maintenance Allows to limit the proliferation of plants Does not yellow Compatible with SikaTop and Sika Monotop repair mortars Ideal for exposed aggregate slabs, interlocking pavers, deactivated or sandblasted non-structural aesthetic concrete, patterned slabs, etc. Carry out a preliminary test on the substrate before use on the complete surface. Sikagard 681 Clear Floor Protection 11L Provides a wet or satin finish depending on the nature of the substrate and the quantity applied. Aesthetic and uniform finish Protects substrates from aggressive atmospheric agents and carbon dioxide Brings out the colours Improved stain resistance Easy cleaning and maintenance Allows to limit the proliferation of plants Does not yellow Compatible with SikaTop and Sika Monotop repair mortars Ideal for exposed aggregate slabs, interlocking pavers, deactivated or sandblasted non-structural aesthetic concrete, patterned slabs, etc. Carry out a preliminary test on the substrate before use on the complete surface. Features : SikaCem Deactivator 4-6 20L Density: 1 pH: 4.0 1.0 Application Temperature: + 5C minimum to + 35C maximum Consumption: 4 to 5 m per litre Colour : White Reference : 538132 Sikagard 681 Clear Floor Protection 22L Density: approx. 0.9 Application temperature: from + 5C to + 30C Drying time: Treated surfaces must be protected from rain during the drying time of the product. Dust free: 30 minutes at 20C / Complete drying: 24 hours at 20C Consumption: Consumption depends on the porosity of the substrates: On mortar-based substrates: 2 layers of approximately 100 to 150 g/m2 per layer / On some very closed substrates, a single layer of 100 to 150 g/m2 is sufficient. Application in hot weather or on hot substrates can lead to an increase in consumption. Colour: Colourless, gives a wet effect after drying. Packaging: 22L Bucket (makes it possible to make from 66 to 100 m2 approximately, in 2 layers) Reference : 1447 Sikagard 681 Clear Floor Protection 11L Density: approx. 0.9 Application temperature: from + 5C to + 30C Drying time: Treated surfaces must be protected from rain during the drying time of the product. Dust free: 30 minutes at 20C / Complete drying: 24 hours at 20C Consumption: Consumption depends on the porosity of the substrates: On mortar-based substrates: 2 layers of approximately 100 to 150 g/m2 per layer / On some very closed substrates, a single layer of 100 to 150 g/m2 is sufficient. Application in hot weather or on hot substrates can lead to an increase in consumption. Colour: Colourless, gives a wet effect after drying. Packaging: 11L Bucket (for 33 to 50 m2 approximately, in 2 layers) Reference : 1449 Packaging : 1x Pro Kit Deactivated Concrete Kit 25m 1x Deactivator 4-6 20L 1x Floor protector colourless 22L 1x Floor protector colourless 11L Delivered in its original packaging Tips : Use Sika products with care. Before use, please refer to the manufacturer's product manual available on the sika.co.uk website.
