SIKA pre-compressed polyurethane foam Printer Foam - 15x3x7mm - 8m

SIKA pre-compressed polyurethane foam Imprimousse - 15x2x5mm - 8m, open-cell, one-sided adhesive, impregnated with synthetic resin, intended to be compressed in the joint between two elements to ensure air and water tightness. Advantages : Type of adhesive: positioning adhesive Good elastic recovery Resists temperature changes, UV rays and compression Impermeability to driving rain in direct exposure (compressed within the range of use): compliant as it withstands a pressure of 600 Pa Permeability to air (compressed in the range of use) and pressure of 100 Pa: compliant because Features : Shelf life: 24 months under the conditions listed below Storage Conditions: Flat, in original closed cardboard box in a dry room and at a temperature of + 1C to + 25C from the date of manufacture, protected from frost. Do not remove the plastic film holding the rolls. Operating temperature : From - 40C to + 100C Roll marking: adhesive width / range of use (roll thickness in mm): 15 / 3-7 Length: 8M Packaging : 1 x SIKA pre-compressed polyurethane foam Printed - 15x3x7mm Delivered in its original packaging Tips : SUPPORT Carefully clean the substrates: remove dust, laitance, oil, grease, rust, etc. and any products that may affect the adhesion of the adhesive. Perfectly dress the substrates, if necessary, to respect the required range of use.