SIKA Pre-dosed micro-mortar SikaTop Coated Pool and Cave Paint - 18.48kg

Pre-dosed SIKA SikaTop micro-mortar Coating Paint Pool and Cellar - 18.48kg, ideal in addition to waterproofing. The product is applicable on wet substrates and coloring is possible with commercial pigments. Its permeability to water vapor allows the support to breathe. Advantages: Applicable on wet but not dripping substrates Coloring possible with commercial pigments Excellent adhesion on concrete, mortar, stone, brick, cellular concrete Waterproof Permeable to water vapor: lets breathe the support Good chemical resistance to water common pool water treatment products Can be renovated in time by a new layer Can be tiled with SikaCeram-205 or SikaCeram-206 Read the instructions before use Characteristics: Density: 1.5 Application temperature : + 5 C minimum at + 30 C maximum Practical Usage Time: About 1 hour at 20 C Consumption: 1 kg / m in 2 layers or 1 kit of 6.16 kg for 6 m Packaging: Delivered in its original packaging Advice: SUPPORT The support must be clean, healthy and cohesive, dust-free and free of traces of oil or any substance that may affect adhesion. It must have a superficial cohesion of at least 1 MPa. The coating and the screed under the product should not be smoothed but floated in order to have good adhesion. Application The application is done with a brush, a medium-hair roller or a first-layer beaker on the walls. The particular points will be treated with the brush (angle, connections, etc). It is necessary to lay two layers minimum. Waiting time between 2 layers: 6 hours minimum at 20 C. It is necessary to moisten slightly before applying the second coat. When using a renovation layer, on a clean and healthy substrate, after moistening, apply a coat to the short-haired roller at a rate of approximately 400 g / m. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.