SIKA Sika Anchorfix 1 PRO Fast Chemical Sealing - Gray - 300ml

SIKA Sika Anchorfix 1 PRO Fast Chemical Sealing - Gray - 300ml, easy to apply, this product is suitable for quick chemical seals of threaded rods in masonry. Adhesion on many substrates for increased versatility and a cure tracer for more efficient work. Advantages: A multi-use product applicable on many substrates (brick, breeze block, cellular concrete) European Technical Evaluation Color change curing plotter A versatile product, easy to extrude Professional quality with high performance Fast curing Styrene free A + rating: very low level of VOC emissions in indoor air Usable with a universal extrusion gun CE marking, European Technical Assessment ETA-16/0853, according to ETAG 029 (masonry support, according to EN 771-1 and 771-3 , with threaded rods M8-M12) Features: Density: 1.63. Application temperature: -5 C to + 30 C Extrusion color: blue / hardening: gray Color: gray Packaging: 300 ml cartridge with 2 clipped mixing nozzles Reference: 529661 Packaging: Comes in original packaging Advice: SUPPORT The support must be clean, healthy and cohesive. Drill the anchor hole using a drill and drill bit with the appropriate diameter and depth. Clean the anchor hole To seal in the hollow supports, insert a suitable diameter sieve into the hole, leaving the center ring open. The threaded rods to be sealed must be clean, degreased and free from any substance or particles (dust, grease, etc.). , oil). APPLICATION Introduce the nozzle at the bottom of the hole and then by successive pressures on the gun trigger, extrude and inject the resin from the bottom of the hole or sieve while progressively pulling back the mixing nozzle. To do this, move the gun a graduation on the nozzle between each pressure on the trigger. Be careful to avoid air inclusions in the resin; until the end of the application, the extrusion must be continuous and not be stopped, or withdrawn from the nozzle of the hole Close the sieve with the center ring (case of hollow body sealing) . The conical part of the ring must imperatively be returned to the body of the sieve. Immediately engage the sealing element in the hole (or sieve) by lightly rotating it clockwise to the bottom of the hole (or sieve). Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.