SIKA SikaCem Film Surface Protector - 20kg

SIKA SikaCem Film surface protector - 20kg, a ready-to-use pasty liquid forming a non-stick film and protects treated surfaces against concrete splashes, deactivating agents and curing agents. This product is applicable to all construction materials, horizontally or vertically. Advantages: Semi-pasty consistency and ready-to-use This product can be used on all application plans Adheres to all building materials: stone, pavers, wood, paint, plaster, aluminum, glass, plastics, concrete Form a non-stick protective film provides temporary protection of surfaces Does not change the appearance of surfaces after washing Easy to apply (brush, broom, brush) Cleaning is done after curing concrete with a pressure booster water pressure minimum 80 bar Characteristics: Density: approximately 1.10 Viscosity: approximately 3300 mPa.s Dosage: 200 to 300 g / m depending on the nature of the support to be treated Colors: Opalescent green Packaging: 20kg Reference: 2930 Packaging: Comes in its packing Original Tips: APPLICATION Apply an even layer of SikaCem Film on the surfaces to be treated, the day before or shortly before concreting. If the areas to be protected are to be trampled during concreting operations, it is preferable, in this case, to apply SikaCem Film the day before. Application on dry or wet substrate. Cleaning: After curing the concrete, the cleaning is carried out with a water booster with a minimum pressure of 80 bar. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.