SIKA SikaCem High Performance Premix Pack - 25kg

SIKA SikaCem Pack high-performance premix - 25kg, a short and long-term high-performance premix for micro-concretes, mortars, grouts and colors. This product is suitable for firm or plastic consistency and resists abrasion. Advantages: A multi-use product Easy to use Job security Allows a firm or plastic consistency The product can be colored Practical long-term use Fast resistance-mounted High performance in the short and long term High resistance to abrasion Discount in quick service CE marking - NF EN 13813 - Screed material Characteristics: Fresh density: approx. 2 Application temperature: between 5 and 35 C. Practical duration of use: + 20 C = 2h / + 35 C = 1h30 Color: Gray Packaging: 25kg Reference: 71667 Packaging: Comes in its original packaging Advice: PREPARATION Barbotine / Gobetis hanging: Prepare a solution composed of 1.4 liters of Sikalatex Pro and 4.2 liters of water (1: 3 ratio: Sikalatex Pro / water). Spoil a bag of SikaCem Pack with this solution until you obtain a homogeneous mixture. Micro-screed: Mix with 4 liters of water, a bag of SikaCem Pack and dry sand of 0-2 particle size. Throat mortar: Mix with 1.4 liters of Sikalatex Pro and 4.2 liters of water (1: 3 ratio: Sikalatex Pro / water), 1 bag of SikaCem Pack and 0-2 dry sand. Laying mortar (tile, paving), dressing, screed, micro-concrete: Mix with 4 liters of water, a bag of SikaCem Pack and dry sand of 0-2 grit (laying mortar, plaster dressage), 0-4 (screed) or 3-8 (Micro-concrete). APPLICATION Depending on the type of work to be performed, apply the SikaCem Pack mixture in the traditional way according to the rules in force. As with any hydraulic mortar, works with SikaCem Pack must be protected from freezing, wind and sun during setting and curing. The SikaCem Pack, used as a screed or micro-screed, requires the application of a slurry beforehand. Use SikaLevel-31W primer for concrete or cement screed. Use Sika Primary Primary Anhydrite Primer for anhydrite screeds. Be careful to avoid too rapid evaporation of the mortar water, using a curing compound or any other means (humidification after setting the mortar, tarpaulin). Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.