Sika SikaCeram outdoor pool tile adhesive - 25kg

SIKA SikaCeram Outdoor Tile Adhesive Pool - 25kg, can be used horizontally or vertically, this hydraulic tile adhesive is particularly suitable for a pool application in new or renovation. Suitable for many substrates and rated C2-ET. Advantages: Can be used horizontally and vertically Hydraulic tile adhesive After sealing with water, we obtain a white thixotropic adhesive mortar Easy to apply Use for new or renovation work Read the product leaflet carefully before use Characteristics: Application temperature: 5 to + 30 C Open time: 30 min (at + 23 C, 50% RH) Adjustability time: About 20 min (at + 23 C, 50% RH) Time before execution of joints: 12 to 24 hours, depending on the temperature conditions Practical Use Time: 3 hours (at + 23 C, 50% RH) Restarting: watering: 21 days Color: white Packaging: 25kg Reference : 412794 Packaging: SIKA SikaCeram outdoor tile adhesive Pool - 25kg Delivered in its original packaging Advice: SUPPORT Applies to concrete, plaster, cementitious screed, Sikalastic 155 The substrate is moistened beforehand if necessary (very strong surface application) absorbent or having been exposed to the sun in hot weather). The substrate must not release moisture and be free of any film or puddle on the surface during application. APPLICATION Spread the adhesive mortar on the support using a trowel or a trowel, then adjust the thickness with a notched spatula (choice of teeth according to the format of the coating and the flatness of the support In the case of double gluing, coat the back of the glue with a thin layer of adhesive mortar (1 to 2 mm) and, within the open time, place the coating on the glued backing and press firmly or beat it In order to remove the air and to obtain a good transfer of the adhesive mortar Clean the coating with wet sponge as soon as it is put in. Use Sika products with care Before using, please consult the manufacturer's product manual available on the website sika.fr