SIKA Sikagard 6250 Anti-Corrosion Thixotropic Wax - 1L - White

SIKA Sikagard 6250 - 1L anti-corrosion thixotropic wax - White, an ideal protection for the repair of hard-to-reach areas in vehicles. Resistant to washing, heat and salt, easily protect your engine and all other hidden areas of your car! Advantages: Form a long-lasting protective film, resistant to tearing and washing Very good resistance to heat No dulling or drip during application Quick and easy to use High salt resistance and excellent repelling effect water, ideal to avoid long-term corrosion Low VOC content, free of aromatic compounds and heavy metals: no attack on the paint Characteristics: Density: 0,85 kg / l approximately Application temperature: +15 to + 25 C Thickness of the film: wet: 100?m / sec: 50?m Color: white Packaging: Can 1L Reference: 440220 Packaging: Comes in its original packaging Advice: SUPPORT The surfaces must be clean, dry, free from rust, grease and of dust. The raw metals will have to be treated beforehand in order to improve the resistance to corrosion. APPLICATION SikaGard 6250 can be applied using an airmix gun with an air pressure of 3 to 6 bar. For advice on choosing and setting up an application system, contact the Sika Industry Engineering Department. Shake about 40 times, the can before any use. Protect surrounding areas before spraying. Spray at room temperature and at a distance of 25 cm from the surface or into the cavity using a flexible hose. Use existing access points or create new ones by drilling through holes. Spray a homogeneous layer. Do not spray on brake systems or exhaust. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.