SIKA Sikagard Floor Protection MAT - 5L

Waterproofing SIKA Sikagard Protection Ground MAT - 5L, improves the waterproofing of porous soils and their resistance to the penetration of oils and greases. Without surface alteration, the support retains its original appearance. Advantages: Improved waterproofing, by the penetration of a polymer resin in the free interstices of the material Protector and surface hardener, improves the resistance to penetration of oils and greases Non-film-forming: penetrates into the support Colorless and matte after drying, retains the natural appearance of the substrate Read the package leaflet before use Characteristics: Density: about 1.1 pH value: about 8.5 Consumption: 0.20 L to 0.25 L / m Application temperature: +5 C and + 30 C. (Do not apply below 5 C and too hot) Capacity: 5L Color: White, colorless and matte after drying Reference: 460502 Packaging: Comes in original packaging Advice: SUPPORT Mortars must be sufficiently hard and absorbent to allow the penetration of the product Make sure that the support to be treated is sufficiently porous to allow the penetration of Sikagard Protection Sol MAT.Take the following absorption test: deposit a few drops of water on the support to be treated. are quickly absorbed (less than 10 s): the support is sufficiently porous, it can be waterproofed normally If they are slowly absorbed (from 1 to 10 min): the support is not very porous, the support can be waterproofed in a thin layer. If the water is not absorbed, the support is too "closed" and can not be waterproof APPLICATION Apply in 1 single layer evenly, by roller or brush. A low pressure sprayer can also be used. Well impregnate the support while avoiding overconsumption. Be sure to protect from rain for 24 hours after application. Drying time / return to service time: 12 to 24 hours, depending on ambient temperature and humidity. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.