SIKA Sikagard protection paint Sloped roof - Terracotta - 4L

SIKA Sikagard protection paint Sloped roof protection - Terracotta - 4L, prevents the penetration of rainwater while allowing the support to breathe. Good resistance to weather, frost and UV, this protective paint will allow you to protect your surface without alteration over time. Advantages: Elastic diaphragm: Sikagard Dry Film Protection Sloped roofs retain excellent flexibility over time, allowing it to withstand crazing and microcracking of the substrate Protection against water infiltration: Sikagard Protection Sloped roofs prevent the penetration of water rain while leaving "breathe" support Sikagard Protection Sloped roofs improves the insulating power of walls by removing moisture Adhesion on many supports even slightly damp: concrete, mortar, breeze block, fiber cement, tiles, slates, bricks, steel, zinc, aluminum, PVC and polyester Resistance to bad weather, aging, prolonged action of the gel and UV, even in aggressive atmosphere urban, industrial or marine Simplicity of implementation Coating in aqueous phase, low content VOC (Volatile Organic Compounds) Read the package leaflet before use Characteristics: Dens ity: about 1,3 Consumption: About 1 L / m for 2 layers Application Temperature: between + 10 C and + 30 C Capacity: 4L Colors: Terracotta Reference: 460507 Packaging: Comes in original packaging Advice: SUPPORT New concretes and mortars will be at least 28 days old. The substrates must be clean, sound, free from any non-adhering parts or that may hinder adhesion (fats, oils, old paints ...). Lightly sand the synthetic substrates to create a micro-roughness. Degrease and protect from corrosion with a rustproof primer the ferrous substrates. APPLICATION Apply Sikagard Protection Roofs inclined in two layers by brush or roller. Apply a primer layer (3 parts Sikagard Protection Sloped Roofs diluted with 1 part water) on the porous substrates. Waiting time between 2 layers: 12 to 24 hours according to temperature and hygrometry. The site will be protected from rain during and after the application of Sikagard Protection Sloped Roofs (4 hours minimum). Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.