SIKA Sikagard Sloped Roof Protector - Gray - 1L

SIKA protection paint Sikagard Sloped roof protection - Gray - 1L, prevents the infiltration of water while allowing "breathe" the support. Easy to use, this product will allow you to improve the insulating power of walls by removing moisture. Adhesion on many substrates such as bricks, zinc, steel, PVC, concrete etc. Low content of volatile organic compounds. Advantages: Elastic diaphragm: Sikagard Dry Film Protection Sloped roofs retain excellent flexibility over time, allowing it to withstand crazing and microcracking of the substrate Protection against water infiltration: Sikagard Protection Sloped roofs prevent the penetration of water rain while leaving "breathe" support Sikagard Protection Sloped roofs improves the insulating power of walls by removing moisture Adhesion on many supports even slightly damp: concrete, mortar, breeze block, fiber cement, tiles, slates, bricks, steel, zinc, aluminum, PVC and polyester Resistance to bad weather, aging, prolonged action of the gel and UV, even in aggressive atmosphere urban, industrial or marine Simplicity of implementation Coating in aqueous phase, low content VOC (Volatile Organic Compounds) Read the package leaflet before the product is implemented Features: D ensit: 1,3 approximately Consumption: About 1 L / m for 2 layers Application Temperature: between + 10 C and + 30 C Colors: Gray Article number: 460553 Packaging: Comes in original packaging Advice: SUPPORT new concretes and mortars will be at least 28 days old. The substrates must be clean, sound, free from any non-adhering parts or that may hinder adhesion (fats, oils, old paints ...). Synthetic substrates (PVC, polyester) will be slightly sanded to create a micro-roughness. Ferrous substrates will be carefully degreased and protected from corrosion with a rust preventive primer. Application Apply Sikagard Protection Roofs inclined in two layers by brush or roller. On porous substrates, first apply a primer (3 parts Sikagard Protection Sloped Roofs diluted with 1 part water). Waiting time between 2 layers: 12 to 24 hours according to temperature and hygrometry. The site will be protected from rain during and after the application of Sikagard Protection Sloped Roofs (4 hours minimum). Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.