SIKA Sikagard Sloped Roof Protector - Gray - 4L

SIKA Sikagard protection paint Sloped roof protection - Gray - 4L, an excellent protection against water infiltration film that allows it to withstand crazing and microcracking of the substrate. This product improves the insulating power of the mirs by eliminating the humidity, whether in industrial, urban or marine environment. Advantages: Elastic diaphragm: Sikagard Dry Film Protection Sloped roofs retain excellent flexibility over time, allowing it to withstand crazing and microcracking of the substrate Protection against water infiltration: Sikagard Protection Sloped roofs prevent the penetration of water rain while allowing "breathing" the support Sikagard Protection Sloped roofs improves the insulating power of walls by removing moisture Adhesion on many even slightly damp substrates: concrete, mortar, breeze block, fiber cement, tiles, slates, bricks, steel, zinc, aluminum, PVC and polyester Resistance to bad weather, aging, prolonged action of the gel and UV, even in aggressive atmosphere urban, industrial or marine Simplicity of implementation Coating in aqueous phase, low content VOC (Volatile Organic Compounds) Read the package leaflet carefully before using the product ues: Density: about 1,3 Consumption: About 1 L / m for 2 layers Application Temperature: between + 10 C and + 30 C Colors: Gray Article number: 460509 Packaging: Comes in the original packaging Advice: SUPPORT New concretes and mortars will be at least 28 days old. The substrates must be clean, sound, free from any non-adhering parts or that may hinder adhesion (fats, oils, old paints ...). Synthetic substrates (PVC, polyester) will be slightly sanded to create a micro-roughness. Ferrous substrates will be carefully degreased and protected from corrosion with a rust preventive primer. APPLICATION Apply the product in two layers by brush or roller. On porous substrates, first apply a primer (3 parts Sikagard Protection Sloped Roofs diluted with 1 part water). Waiting time between 2 layers: 12 to 24 hours according to temperature and hygrometry. The site will be protected from rain during and after the application of the product (4 hours minimum). Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.