SIKA Sikagard Waterproof Protection Protection All in 1 - 2L

SIKA Sikagard Waterproof Protection Protection All in 1 - 2L, the ideal ally for an invisible protection of your surfaces against liquid penetration and stains! Its application is simple and the product resists UV rays without yellowing and without smothering the material. Usable on most building materials. Advantages: Product in aqueous phase Indoor / outdoor use Protects against the penetration of water, oil, diesel Protects against stains Suitable for all types of facades, floors and roofs Usable on most building materials construction Fast application (in 1 or 2 layers) without waiting time between 2 layers Provides invisible protection, no change of appearance Lightly revives the original colors of the material (according to support and according to shade) Allows the support to breathe Resistant to ultraviolet rays, does not yellow Gives a beading effect on certain materials Facilitates the cleaning of graffiti Read carefully the instructions before used of the product Characteristics: Density: about 1 to 20 C pH value: about 6 to 20 C Consumption : On Very porous substrates: from 0.30 L to 0.60 L per m and per layer / On low porous substrates: from 0.05 L to 0.20 L per m and per layer Application Temperature: + 5 C min. / + 30 C max Capacity: 2L Colors: Transparent Reference: 530228 Packaging: Comes in the original packaging Advice: SUPPORT Ensure that the substrate is clean, dust-free and dry. All particles not adhering to the support, contaminations (stains, traces of oil, grease ...) must be removed by brushing or washing with water under pressure. Before applying the Sikagard Protection All in 1, it is also recommended to clean the support (foams, drips, traces of pollution, etc.). APPLICATION Apply by brush, roller or low pressure sprayer directly to the surface to be treated until the material is saturated. On a porous support: only 1 coat is sufficient. The support must be impregnated uniformly but without excess. Avoid over-consumption and eliminate sagging if necessary. On porous support: application in 2 layers. The first layer as indicated above. The second coat is applied before the first coat is completely dry (dry to the touch), 30 minutes maximum after the first coat. Split the application of supermarkets into areas of 10 to 20 m. Application without excess in a uniform way. Avoid over-consumption and eliminate sagging if necessary. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.