SIKA SikaLastic Color Waterproof Flexible Roof Coating - White - 20kg

SIKA SikaLastic Color waterproof waterproof roofing - White - 20kg, forms an adherent, elastic and waterproof membrane after drying. It prevents the penetration of rainwater while allowing the support to breathe. This product is indicated for the protection of roof-terraces, corrugated metal sheets or plates (zinc, steel, fibers, cement), vaults and zinc gutters. Advantages: Easy to implement, the product is mono component Waterproof, it prevents the penetration of rainwater, while allowing the support to breathe A very elastic and flexible film that allows him to bridge the cracks of the support to the weather, this coating is insensitive to UV, water and heat Good adhesion on many substrates such as concrete mortar, terracotta, steel, zinc, fiber cement ... Repair easily Application in vertical (readings) The product can be colored with pigments for acrylic paint Characteristics: Density: 1,2 Application temperature: 5 to 35 C . Do not apply if there is a risk of rain during or within hours of application. Resistance to cracking: Greater than 1.5 mm in instant cracking. Drying: Dust free: 2 to 3 hours depending on temperature and humidity Color: White (can be colored with acrylic paint pigment) Packaging: Bucket 20kg Reference: 406085 Packaging: Comes in original packaging : SUPPORT Supports must be clean, sound, cohesive, free of all or no adherent parts, fats, oils, old paints and more generally any product that may affect the adhesion of the coating. New concretes and mortars must be at least 28 days old. Chamfer outward angles. In the re-entrant angles, make a mortar groove (Sika Monotop). Waiting time before recovery by SIKALASTIC COLOR: 7 days. Gaskets and cracks larger than 1 mm are pre-treated, after U-shaped opening, by Sikaflex sealant application on Sika backing. For metal substrates, SikaLastic Color is compatible with most anti-corrosion coatings. Refer to the technical manuals of these products. APPLICATION On porous substrates, first apply a layer of primer consisting of 3 parts of SikaLastic Color diluted with one part of water (by volume). Apply SikaLastic Color in 2 or 3 coats by brush or roller. On the right of singular points (cracks less than 1 mm, cracks and joints greater than 1 mm and previously treated with Sikaflex mastic, angles, raised, ...) and in the case of tiled or micro fissured supports, incorporate the Sikarmature weft in the first layer of SikaLastic Color. Waiting time between layers: as soon as SikaLastic Color is dry to the touch. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.