SIKA SikaMur InjectoCream Anti-Moisture Pro Kit - 20m

The SIKA SikaMur InjectoCream - 20m Anti-Moisture Pro Kit is a ready-to-use injection cream that helps control rising dampness in interior and exterior walls. Once injected, the product diffuses into the wet wall to form a barrier blocking the water and preventing the appearance of moisture. It is used in virtually all types of masonry walls (brick and natural stone walls, hollow walls, underground walls and stone and rubble backfill walls) Advantages: Concentrated formula with about 80% active ingredients giving much more effective results compared to less concentrated products Easy to use Fast implementation (no "double drilling", no need to wait for the liquid to come under pressure or gravity) It is not necessary to pre-seal around drill holes Consistent product consumption (easy to calculate the amount of product needed) No need for special and expensive injection pump No risk of increased efflorescence Characteristics : Density: about 0.9 (at 20 C) Application Temperature: at + 5 C during and at least 48h after Application Color: White Kit 20m: including 5 bags of 600 ml and 1 spray gun with 3 nozzles 20 linear meters Packaging: Delivered in its original packaging Advice: APPLICATION Release the masonry to identify the area to be treated. Drill holes 10 to 12 mm in diameter with a maximum spacing of 12 cm between each hole. Dust thoroughly each hole. Insert the cannula into the holes and inject SikaMur InjectoCream. Do not dry wet walls immediately, wait about seven days before resealing. Ventilate the room naturally to allow the walls to dry. GOOD TO KNOW Some white spots may appear around drill holes. They are eliminated by simple brushing after drying. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.