SIKA SikaStop All in 1 - 20L

SIKA SikaStop Healing and Scrubbing Treatment All in 1 - 20L, colourless, odourless liquid, ready to use. Its formula is strongly reinforced in active principle for an effective treatment of roofs, facades and floors. Advantages : Can be applied horizontally or vertically Applicable on all substrates: slate, shingle, stone, brick, concrete, mortar, fibre cement, plaster, earthenware, polyester, zinc. Acts quickly and leaves no traces on the materials whose conservation it improves Long-lasting preventive effect Can be painted or covered with a coating, once the traces have been removed. On painted surfaces, make a preliminary test and wait at least 72 hours to assess the result (check that the paint is not discoloured). Read the instructions carefully before using the product Features : Density: about 1 pH value: approx. 8 Consumption: 1 litre for 7 to 10 m approx. Capacity: 20 L Colour: colourless Reference: 619471 Packaging : x1 SIKA SikaStop Healing and Scrubbing Treatment All in 1 - 20L Delivered in its original packaging Tips : PREVENTIVE ACTION Treat the substrates in spring or autumn to avoid the expansion of green, black and red streaks that can cause damage: heavy soiling, poor rainwater run-off. Apply Sika Stop ALL-IN-ONE directly without dilution to the surface to be treated using a brush, roller, sponge brush or low-pressure sprayer. Do not rinse. HEALING EFFECT Remove thick traces, large lumps on cover and soil elements by scraping or brushing. Then apply Sika Stop ALL-IN-ONE directly without dilution to the surface to be treated using a brush, roller, sponge brush or sprayer until the area to be treated is completely impregnated. Do not rinse. Let it happen. Dried out traces will be progressively eliminated under the action of wind and rain or more quickly, by means of watering with a pressurized water jet or by brushing (wait until the traces are completely dried out before intervening. This can take 1 to 2 weeks or more depending on the nature and intensity of the traces). Repeat the treatment if necessary in severely affected areas. GOOD TO KNOW Treat surfaces in dry, rain-free weather 48 hours after application. Do not apply in hot weather or on hot surfaces. Disconnect the water collectors and wait for heavy rain before re-commissioning them if applying to the roof. LIMITATIONS Rinse accidental splashes and drips on lacquered joinery and gutters with clear water as soon as possible. Treat in dry weather with at least 48 hours without rain after application. Do not apply in hot weather on hot surfaces (risk of evaporation).Do not apply to frozen or thawing substrates.allow to act, do not rinse after application.avoid runoff and contact with soil, waterways, sewers and drains.may be harmful to the environment in case of large spills.do not apply directly to lawns and plants.disconnect water traps. After treatment of roofs, allow the first heavy rains to pass before putting them back into service.Do not dispose of the residue in sewers and watercourses.Dispose of this product and its packaging at a hazardous waste collection centre. Use Sika products with care. Before use, please consult the manufacturer's product manual available on the sika.com website.