SIKA SikaStop Remediation and Scrub Treatment All in 1 - 20L

Curative and descaling treatment SIKA SikaStop All in 1 - 20L, a non-rinsing product designed to eliminate green, black and red marks on faades, roofs and floors. After application, this treatment has a long-lasting preventive effect and can be painted. Significantly improve the life of your materials with one product! Advantages: Applicable horizontally or vertically Applicable on all supports: slate, shingle, stone, brick, concrete, mortar, fiber-cement, plaster, faience, polyester, zinc Acts quickly and leaves no trace on the materials of which it improves the conservation Long-lasting preventive effect Can be painted or covered with a coating, once the red traces have been eliminated On the painted substrates, make a preliminary test and wait for a minimum of 72 hours to appreciate the result (check that the paint is not discolored) Read carefully the instructions before using the product Characteristics: Density: about 1 pH value: about 8 In dry weather and without rain 48h after the Application. Do not apply in hot weather or hot media Consumption: 1 liter for 7 to 10 m Capacity: 20 L Color: colorless Reference: 552459 Packaging: Comes in its original packaging Advice: PREVENTIVE ACTION Treat media in spring or summer autumn to avoid the expansion of Green, Black and Red traces that can cause deterioration: severe fouling, poor runoff of rainwater. Apply Sika Stop TOUT in 1 directly without dilution to the surface to be treated by brush, roller, mop or low pressure sprayer. Do not rinse. CURATIVE ACTION Remove thick traces, large clusters on the covers and floors by scraping or brushing. Then apply Sika Stop TOUT in 1 directly without dilution to the surface to be treated by brush, roller, mop or spray until complete impregnation of the area to be treated. Do not rinse. To let do. The dried out traces will be progressively eliminated under the action of wind and rain or more quickly, by means of a watering with pressurized water jet or by brushing (well to wait until the traces are completely desiccated before This can take 1 to 2 weeks or more depending on the nature and intensity of the traces). Repeat the treatment if necessary in very affected areas. GOOD TO KNOW Treat surfaces in dry weather and without rain 48 hours after application. Do not apply in hot weather or hot media disconnect the water recuperator and wait for heavy rain before the services in case of application on the roof. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.